[Close]           [back]    
Tape & Primer    
HOME / Tape & Primer / Anticorrosion Tape & Primer
♦Anticorrosion Tape & Primer♦

# 14_117

Anticorrosion Tape series:

Anticorrosion Tape

Protective Tape

Joint Wrap Tape

Primer

TAPE TECHNICAL INDEX:

Item Unit Anti-corrosion tape T-100 Protective Tape T-200 Joint wrap tape T-300 Test Method
Color   Black White or Black Black  
Series   T-140 T-150 T-180 T-240 T-255 T-265 T-360 T-380  
Thickness Total mm 0.40 0.50 0.80 0.40 0.55 0.65 0.60 0.80 GB6672
Film mm 0.28 0.30 0.40 0.30 0.40 0.50 0.30 0.30 GB6672
Adhesive mm 0.12 0.20 0.40 0.10 0.15 0.15 0.30 0.50 GB6672
Film Tensile Strength MPa ≥18 ≥18 ≥18 GB1040
Elongation % ≥150 ≥150 ≥200 GB1040
Peel Strength(To primed Steel plate) N/cm ≥18 ≥18 ≥18 GB2792
Peel Strength(To Back Material) N/cm 5-10 5-10 5-10 GB2792
Dielectric Strength Mv/m ≥30 ≥30 ≥30 GB1408
Insulation Resistance Ω.m ≥1*1012 ≥1*1012 ≥1*1012 GB1410
Water Absorptivity % ≤0.35 ≤0.35 ≤0.35 SY0414
Vapour Permeability in 24 hours mg/cm2.a ≤0.45 ≤0.45 ≤0.45 GB1037

PRIMER TECHNICAL INDEX:

Item Unit P19 P27 Test Method
Composition Base Material   Rubber+Resin Rubber+Resin  
Solvent   Petrol Petrol
Color   Black Black  
Solid Content % 19±3 27±3 GB-1725
Finger Touch Time Min 1-5 1-5 GB-1728
Viscosity s 10-20 10-20 GB-1723

1. Anticorrosion Tape

Anti-corrosion tape [inner tape]:Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. It is mainly used on underground, underwater and overhead pipelines. The major function for this tape is for anticorrosion of pipe.

Type Color Thickness Width Length USE
T-140 Black 0.4 50 75 30 50 Mainly used in underground, submarine and overhead pipe line.
T-150 Black 0.5 100 150 60 120
T-180 Black 0.8 230 300  

a. Use polyethylene and butyl rubber as main materials, excellent insulation resistance and Iow water absorptivity.
b. Wide range of operation temperature from-30oC to 80oC.
c. Ideal tape anti-corrosion system is a multi-layer system which is composed of inner anti-corrosion tape and outer protective tape resistant to outside mechanic impact. With high anti-corrosion performance and impact resistance.
d. With a long life of over 30years.
e. Widely used on pipes whose sleeve diameters are from 50mm to 1800mm. Convenient construction, safe and clean operation, suitable to factory production and field construction under normal temperatures.
f. Low cost.

2. Protective Tape

Protective tape (outer tape):Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. The film of protective tape is thicker and higher in intensity. Protective tape will protect the pipe and its anti-corrosion tape surface from damages.

Type Color Thickness Width Length USE
T-240 Black, White 0.4 50 75 30 45 Mainly used in underground, submarine and overhead pipe line.
T-255 Black, White 0.55 100 150  
T-265 Black, White 0.65 230 300 60 120

3. Joint Wrap Tape

Joint wrap tape: Polyethene is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Usually its pe film is thinner than the one of anti-corrosion tape while the adhesive layer is much thicker. Joint wrap is used on pipe joints, fabrications, bends, fittings and tie bars.

Type Color Thickness Width Length USE
T-360 Black 0.6 50 75 30 45 Mainly used in pipe joints, fabrications, bends, fittings and tie bars.
100 150 230  
T-380 Black 0.8   60 120

4. Primer

Primer: black adhesive which is composed of butyl rubber, resin, anti-ager, anti-oxidant, it is coated on the cleaned pipe steel surface.

Type Solid content (kg/can) USE
P19 19 12.5 20 Besmear in the surface of the steel tube that already get rid of rust, to boost up the combine between adhesive tape and steel tube
P27 27 12.5 20
 
©2005-2010,dualbenefit.comZJ ICP BEI No. 06031149