HOME /
metal scraps briquette press / metal scraps briquette press
♦metal scraps briquette press♦
|
hydraulic briquette press for metal scrap
Usage：
It can extrude metal scrap, metal powder into high density metal pieces no need any additive，the metal pieces can be melted down and smelt directly, this immensely cuts the cost.
Features:
It uses PC control, automatic and easy operate.
Advanced hydraulic and oil press, without oil leak, and lower oil temperature.
Whole cast-steel, stamp out the fissility of solder steel.
Oil cylinder In series, improvement the speed.
The main technical parameter :
| Model |
160A |
230 |
300 |
| Nominal Force (KN) |
1600 |
2300 |
3000 |
| Briqueting size (kg/m3) |
￠90x(60-110) |
￠110x(70-120) |
￠120x(70-120) |
| Briqueting density (KG/m3) |
≥5200-5400 |
≥5200-5400 |
≥5200-5400 |
| Work pressure (Mpa) |
16 |
23 |
21 |
| Production Rate (Cast lron chip) (t/h) |
0.6-0.9 |
1.0-1.5 |
1.2-1.8 |
| Total Power (Kw) |
24.2 |
39.2 |
47.2 |
| Weight(Kg) |
6000 |
7500 |
8800 |
| Outside Size (mm) |
4100x1086x2006 |
4100x1086x2006 |
5000x1600x2600 |
|
